英国食品GDAs标签的发展经验及对中国的启发

对英国食品每日摄入量指南（GDAs）标签开展案例研究，结果发现，GDAs标签从包装背面标签转为FOP标签，实施已有20年以上。该标签采用特定营养素体系度量法模型，显示每份食品能量、糖、脂肪、饱和脂肪、盐的含量及其每日参考摄入量占比，既没有颜色编码又没有形象的图标显示，且实施效果不如多数FOP标签。对此，中国可考虑将营养成分表信息以食品份量单位直观显示在包装正面，方便消费者关注与理解。     

灾害孤岛潜势风险分群与降雨警戒值探讨

台湾本身地貌特性以及近年来强降雨事件发生频繁,促使山区地带发生复合式灾害,如崩塌、泥石流与山洪等,因此灾害孤岛效应有必要仿效泥石流以及洪水灾害,制定出参考警戒值以及警戒线,将有助于防灾决策、救难资源投入以及灾害风险判释。本文针对台湾发生过灾害孤岛效应的114个村进行分析,且着重于首次发生灾害的台风降雨事件。首先通过群集分析并依照各样本的6个灾因指标进行分类,群集结果显示可分为8个群,并再以象限分布描述各群的潜势相对风险。采用2004—2015年台风降雨事件的观测雨量数据,并利用距离反比权重法,得出各村的累积降雨量(R)与最大时雨量(I)。整合各群集样本雨量数据后,使用台湾水土保持局使用的RTI模式概念,计算出各群集之RTImin、RTI30、RTI50和RTI70,以绘制低风险区(0～30%)、中风险区(30～70%)和高风险区(70%～100%),其中着重探讨灾害孤岛事件的下限值RTImin,以便可得知最易发生灾害的群集。结果显示,各群的潜势风险反映RTImin的效果良好,如潜势风险越高则其RTImin值越低,即雨量驱动灾害发生的条件较低。群集中,第1与2群为低风险群、第3、5与6群为中风险群、第4、7与8群为高风险群,仅第5群无法透过RTImin验证潜势风险关系,故本文挑选的6项灾因指标,为辨别灾害孤岛效应潜势等级的重要因子。     

平原地区城市湖泊防洪与景观功能协调研究——以枝江市金湖为例

为了使城市湖泊尽可能滞蓄雨洪、发挥景观功能、打造良好的居民"亲水空间",以枝江市金湖为例,根据金湖主要泄洪渠道的实际情况,利用Mike 21模型模拟计算汛限水位值,按照景观水位确定大、小洪水工况下合理的水位。在此基础上,提出传统的静态景观水位与改进的动态景观水位两种方案。结果表明:以50年一遇、30年一遇为代表的大洪水工况下合理景观水位为40.7 m,以20年一遇、10年一遇为代表的小洪水工况合理景观水位为41.3 m;静态方案采用50年一遇洪水计算结果为标准执行,将40.7 m作为金湖固定的景观水位;动态方案水位可在41.3~40.7 m之间波动;金湖适宜采用动态景观水位运行方案,水位可在40.7~41.3 m之间波动;根据短期预报及历史监测资料分析后合理调度,将41.3 m作为金湖常水位,确定预测洪水大小后调整水位迎战洪水。据此,可在充分利用水资源的同时有效协调景观高水位需求与防洪之间的矛盾。     

焦炉前反馈热工控制系统运行实践

焦炉生产是典型的大惯性、非线性、时变快的复杂系统，以“火落温度”为基础的焦炉前反馈热工控制系统，通过立火道温度自动测量与人工测温相关性分析、粗煤气温度测量与火落判断、标准温度的优化等运行实践，达到了自动火落时间判断、标准温度指导、加热和燃烧优化、高低温炉号判别等目的，对于稳定炉温、降低回炉煤气消耗、提高焦炭质量以及推进焦化企业技术进步具有重要意义。     

不同降雨入渗条件下预应力锚索加固边坡稳定性分析

为了研究不同降雨条件下边坡安全系数及预应力锚索轴力变化规律,以省道S303沿线某边坡为研究对象,考虑土体饱和-非饱和渗流与非饱和强度理论,基于有限元分析,对不同降雨工况下的孔隙水压分布、锚索轴力及采用强度折减法计算的边坡安全系数变化规律进行了研究。结果表明: 降雨量一定时,降雨入渗范围随雨强增大而减小,暂态饱和区域随雨强增加而增大; 边坡在加固前后的安全系数均随降雨量增加而不断减小,采用预应力锚索加固能有效提高边坡安全系数,并减小降雨对边坡稳定性的影响; 随着降雨量增加,各锚索轴力均增大,当降雨量一定时,雨强越小,对应的锚索轴力提升幅度越大,靠近底部的锚索轴力对降雨最为敏感。     

Flame Front Deformation Instabilities of Filtration Combustion for Initial Thermal Perturbation

The flame front deformation instability of low-velocity filtration combustion within an inert packed bed is studied based on the initial preheating non-uniformity. Based on the experimental phenomena, an initial thermal perturbation model is numerically proposed so as to predict the deformation behaviors of the flame front instabilities. The numerical prediction indicates that the assumption of an initial thermal perturbation is a feasible explanation as the cause of the flame front inclination instability. As the initial thermal perturbation increases, the phenomena of the flame front break and shrinking instabilities could easily occur at high filtration velocity or low equivalence ratio. Moreover, the evolutions of the flame front break rate and the shrinking rate are quantitatively analyzed.     

降雨入渗及地震作用下边坡稳定性研究

边坡滑坡给社会经济和人民生命安全带来了巨大威胁，降雨和地震是边坡滑坡的两大诱因。以云南省某矿山边坡作为研究对象，取样后在室内进行岩石力学实验，得到后期工作所需的岩石力学参数，利用霍克布朗准则推导出岩体的力学参数，运用理论计算和数值模拟分析降雨和地震对边坡稳定性影响，结果表明：1）在降雨入渗作用下，边坡出现滑坡主要是静水压力造成的；2）在地震作用下，当地震峰值加速度为0.1g时，有效塑性区主要位于边坡中下部，当增大地震峰值加速度，其范围向坡脚移动，当加速度为0.3g时，塑性区出现贯通趋势。     

Turbulent flame structure characteristics of hydrogen enriched natural gas with CO2 dilution

This paper investigated the hydrogen enriched methane/air flames diluted with CO₂. The turbulent premixed flame was stabilized on a Bunsen type burner and the two dimensional instantaneous OH profile was measured by Planar Laser Induced Fluorescence (PLIF). The flame front structure characteristics were obtained by extracting the flame front from OH-PLIF images. And the turbulence-flame interaction was analyzed through the statistic parameters. The role of hydrogen addition as well as CO₂ dilution on the features of turbulent flame were revealed by those parameters. In this work, hydrogen fractions of 0, 0.2 and CO₂ dilution ratios of 0, 0.05 and 0.1 were studied. Results showed that hydrogen addition can enhance turbulent burning velocity ST/S_L through decreasing the scale of the finer structure of the wrinkled flame front, caused by the smaller flame instability scale. In contrast, CO₂ dilution decreased turbulent burning velocity S_T/S_L due to its inactive response to turbulence perturbation and larger flame wrinkles. For all flames, the probability density function (PDF) profile of the local curvature radius R shows a bias to positive value, resulted from the flame intrinsic instability. The PDF profile of R decreases with CO₂ dilution, while the value of local curvature radius corresponding to the peak PDF is larger. This indicates that larger wrinkles structure was generated due to CO₂ dilution, which leads to the decrease in S_T/S_L as a consequence. Hydrogen addition increases the flame volume and results in more intense combustion. CO₂ dilution has a decrease effect on flame volume for both X_H2 = 0 and X_H2 = 0.2 while the decrease is obvious at X_H2 = 0.2, Z_CO2 = 0.1. In all, hydrogen enrichment improves the combustion while CO₂ can moderate combustion. Therefore, adding hydrogen and CO₂ in natural gas can be a potential method for adjusting the combustion intensity in combustion chamber during the combustor design.     

排风扇前盖注射模设计

分析了排风扇前盖塑件的工艺特点,介绍了排风扇前盖注射成型模结构及模具的工作过程。